Tuesday, July 26, 2022< ^ >
Meetecho has set the subject to: DPRIVE-ADD (IETF 113)
Room Configuration
Room Occupants

[09:46:20] cabo leaves the room
[18:48:28] Yoshiro Yoneya joins the room
[19:02:14] <zulipbot> (Glenn Deen) my mic is not working
[19:02:27] <zulipbot> (Glenn Deen) but yes I fell prey to a positive test on Sunday
[19:03:00] <zulipbot> (Éric Vyncke) Prompt recovery
[19:03:13] <zulipbot> (Glenn Deen) $> ?
[19:03:39] <zulipbot> (Éric Vyncke) ;-)
[19:04:46] <zulipbot> (Éric Vyncke) Glenn can you share the slides ? Tale has issues to log in
[19:04:59] <zulipbot> (Glenn Deen) I can try.  But give tale a minute
[19:05:00] <zulipbot> (Glenn Deen) my mic is not working
[19:05:38] <zulipbot> (Éric Vyncke) But, Glenn this would be nice to share the slides from your laptop
[19:05:46] sftcd joins the room
[19:06:31] <zulipbot> (David Lawrence) I'm all logged in now
[19:06:46] <zulipbot> (Glenn Deen) I can share the slides if you need me to
[19:06:50] <sftcd> the not being shown slides
[19:07:37] <zulipbot> (Christian Huitema) where is Eric?
[19:07:46] <sftcd> on stage
[19:08:13] <zulipbot> (Christian Huitema) Out of camera...
[19:09:10] <zulipbot> (David Lawrence) Two cameras; one is on him
[19:11:47] <zulipbot> (Ted Hardie) Jim's volume is a bit low.
[19:12:00] <zulipbot> (Glenn Deen) we don't yet have a scribe
[19:13:42] <zulipbot> (Éric Vyncke) We cannot start w/o a scribe
[19:14:10] <zulipbot> (Éric Vyncke) Thank you Andrew
[19:14:36] <zulipbot> (Éric Vyncke) Thank you Paul ;-)
[19:15:29] <zulipbot> (Glenn Deen) 👍 All good things are progressing nicely with IESG
[19:16:05] <zulipbot> (Glenn Deen) They have slides
[19:16:18] <zulipbot> (Éric Vyncke) SVCB doc is now clear of all DISCUSS
[19:17:01] <zulipbot> (Glenn Deen) Tale - each of those have slide and speakers
[19:21:11] <zulipbot> (Glenn Deen) Rebooted as should have a working mic now.  But it looks like things are rolling now.
[19:21:38] <zulipbot> (Tim Wicinski) Glenn - can you approve the Unilateral probing slides thx
[19:23:04] <zulipbot> (Glenn Deen) @Tim - done
[19:54:58] <zulipbot> (Andrew Campling) How about an interlude show tune from Tale?
[19:55:12] <zulipbot> (Éric Vyncke) ;-)
[19:57:04] <sftcd> dkg's slides
[19:57:14] <zulipbot> (Christian Huitema) DO others see the s;ide?
[19:57:14] <zulipbot> (Éric Vyncke) No
[19:57:27] <zulipbot> (Andrew Campling) Not yet
[19:57:27] <zulipbot> (Hazel Smith) Nope, not here anyway
[19:57:40] <zulipbot> (Éric Vyncke) Just suggested to Tale to share his screen
[19:58:06] <zulipbot> (Éric Vyncke) @meetecho same issue as this morning with james and v6ops
[19:59:23] <zulipbot> (Lorenzo Miniero) Can you let us know which slide deck caused the issue? We'll have a look later
[19:59:49] <zulipbot> (David Lawrence)
[20:00:02] <zulipbot> (David Lawrence) It was approved at Meetecho was started for the group
[20:00:02] <zulipbot> (Éric Vyncke) @lorenzo
[20:00:17] <zulipbot> (David Lawrence) Reloading materials from the folder did not repopulate "Share Preloaded Slides"
[20:01:01] <zulipbot> (David Lawrence) s/approved at Meetecho was started/approved *after* Meetecho was started/
[20:01:40] <zulipbot> (Éric Vyncke) @lorenzo in V6ops
[20:01:53] <zulipbot> (Lorenzo Miniero) Reloading material is not enough to populate preloaded slides: that only ensures Meetecho is aware of those slides, but they need to be processed. We usually do that automatically before the session starts, but if other slides are added later, they need to be imported manually. As a chair, you can do that using the settings icon in the top right and choose "Manage slides", from where you can import all the slide decks you'll need
[20:02:58] <zulipbot> (David Lawrence) Cool, I see that UI control.    Maybe a hint for that could be added to the Share Preloaded Sides popup?
[20:05:49] <zulipbot> (Lorenzo Miniero) I'll relay to the UI team :)
[20:07:48] sftcd leaves the room
[20:09:35] <zulipbot> (David Lawrence) Thank you all!   Meeting is closed.
[20:21:40] sftcd joins the room
[20:46:37] sftcd leaves the room
[21:00:34] Yoshiro Yoneya leaves the room
Powered by ejabberd - robust, scalable and extensible XMPP server Powered by Erlang Valid XHTML 1.0 Transitional Valid CSS!